PIPE CUTTING MACHINE
worm gear drive for smooth power transmis-
sion. The heavy-duty construction includes
carbide saw guides and rigid guide supports.
The saw features manual saw frame
raise/lower; a manual vise; hydraulic-/sole-
noid-powered downfeed; and status indica-
tors for power on, correct blade tension, bro-
ken blade, and band wheel cover open.
Kalamazoo Machine Tool • 269-321-
8860 • www.kmtsaw.com
HGG has introduced the ProCutter 600,
designed for cutting complex piping constructions up to 24 in. dia. According to the
manufacturer, the tool also reduces grinding, fitting, and welding time after pipe profiles are cut. Along with onboard MDI programs, the tool supports building information modeling (BIM) software.
The standard machine comprises proprietary software for 3-D, parameter-based
part profile programming and work preparation; a three-jaw chuck for pipe positioning; a pipe support and cutting bed with
pipe carriages or a roller chute for loading
and unloading; a durable machine frame; a
Y-carriage with either oxyfuel or plasma
biaxial cutting heads; and an operator interface with graphic touchscreen navigation.
Profile cutting parameters such as root,
kerf, and divergence can be programmed
into the software for fit-up. The software
also includes two patented cuts: the partial
joint penetration (PJP) and the strainer.
HGG Profiling Equipment • 330-461-
6685 • www.hgg-group.co
MANUAL BAND SAW
The Kalamazoo Machine Tool model H235
manual band saw is designed for light-duty
cutting of tubes, pipes, light structural
shapes, and small solids up to 8 in. at 90
degrees. The saw has a variable-speed blade
from 65 to 320 FPM and can miter up to 60
degrees to the right while maintaining the
material in line.
The drive uses a single-phase power supply to run a 230-V, three-phase drive motor.
The drive motor is coupled directly to a
PIPEMASTER. Simply the Best Tool for Welding Small Pipe Thirty-five years of listening to our customers and continuous product improvement have led to the Pipemaster 515 and D-Head. The system welds pipe from 1" - 14" (tubes from 1" - 5" OD).
Let us demonstrate how you can increase your productivity and
lower defect rates with the high duty cycle that only machine
welding can achieve.
Worldwide installations in daily use
prove that there is a better way.
ORBITAL WELDING SYSTEMS