Clean Air America offers welding stations that
keep fumes and gases away from workers.
The Weldstation 5 booth meets low-energy air filtration (LEAF) standards. With
features such as automatic start/stop, vari-able-frequency drive, LED lights, high-efficiency blowers, and Premium® efficiency
motors, the unit saves up to 80 percent
in energy requirements.
The Flexi-Booth is a customizable
welding and grinding booth designed for
welding of large pieces. It uses the backdraft
effect to overcome the heat of welding and
the pull of gravity.
The company also manufactures flexible
fume arms and clean air ducts for removing
smoke and fumes on a larger scale.
Welding stations designed for low energy use, large-part welding
Clean Air America, 7 Superior Blvd.,
Rome, GA 30161, 866-665-1829,
Tube and pipe weld purge system features low-profile valve
Huntingdon Fusion Techniques has introduced the PurgElite® series of tube and pipe
purging systems for diameters from 1 to 12 in.
It features a low-profile purge gas release
valve that is required to purge the chamber
between the two dams after they are inflated.
The new valve reduces to 1 in. the minimum
diameter of tube and pipe that can be welded. It also allows manufacturers of stainless
steel tubular systems to purge pipes locally
rather than fill complete systems with large
amounts of inert gas.
The system employs a synthetic hose that
can withstand temperatures up to 1,292
Huntingdon Fusion Techniques Ltd.,
Stukeley Meadow, Burry Port, Cams,
SA16 OBU U.K., 44-1554-836-836,
Proto-1 Mfg. LLC offers the PDM-330, a portable deburring
machine for tube ODs from 0.25 to 2 in.
The 50-lb. unit features toolless, quick-change heads; a chip
collection tray; variable-speed control; a jam/overtorque shutdown
circuit; a safety circuit to prevent operation without the front guard;
a carrying handle; and slip-resistant feet.
The machine is available with 2000, 3000, 4000, and 5000
series Roto-D-Bur™ heads and the company’s IOF chamfering
Portable machine deburrs tubes up to 2 in. OD
Proto-1 Mfg. LLC, 10 Tower Road, Winneconne, WI 54986,
920-582-4491, firstname.lastname@example.org, www.proto1mfg.com
The Envirosight ROVVER X™ can inspect
many pipe sizes with the addition of a
bolt-on carriage that raises the crawler and
expands its wheelbase and ground clearance.
The carriage, which attaches in seconds,
accepts all ROVVER wheels, as well as two
new pneumatic wheel options.
When used in tandem with the system’s
remote camera lift accessory, the carriage
gives the crawler an overall inspection
capability of 6 to 72 in., plus the ability for
centered viewing in most common pipe sizes
24 in. and larger. It elevates the crawler at
least 4. 4 in., or more with a pneumatic wheel
upgrade. The carriage also lengthens the
crawler’s wheel base 75 percent, widens it
150 percent, and grants up to 7.75 in. of
Envirosight LLC, 111 Canfield Ave.,
Randolph, NJ 07869, 866-936-8476,