Large and compact angle and die grinders
Not the same old grind.
Whatever the application, FEIN has the fit for you.
Clamp helps reduce distortion during welding process
The Angle-Rite® clamping system from Meridian Stainless helps reduce shrinkage distortion
that commonly occurs during tube and pipe
welding. The system is designed to allow complete setup, cutting, and welding while the
clamp is attached, so the angle and rotation of
tube and pipe are maintained throughout the
The system comprises a primary clamp that prebends the intersected tube before welding. The secondary clamp holds the intersecting tube or pipe in a precise angle to be miter cut using the
reciprocating saw attachment or notched using the abrasive or
hole saw notcher. Following cutting, the secondary clamp holding its tube or pipe is rejoined with the primary clamp and its
attached tube or pipe. The angle and rotational alignment of the
tubes or pipes are retained throughout the entire process.
With the system clamping the primary and intersecting tube or
pipe in place, the welder can weld the joint without requiring a
third hand. The primary clamp’s bending force compensates for
weld stress distortion during the welding process.
Meridian Stainless Inc.