Speed isn’t the only consideration, of
course. Given the nature of the product’s
application, Goodridge has no tolerance
for poorly crimped brake lines. Ease of
operation and reliability are two other
factors Lagrosa mentioned.
“The CC22 is easy to operate,” Lagrosa said. “You touch the foot pedal, it
closes, it crimps, and you’re done. Everything that we produce has a crimp. In the
1.4-million assemblies we produce in
Mexico each year, there are at least two
crimps in each assembly. Throughout our
North American operations, there are
millions of assemblies produced with
multiple crimps. For high-volume crimping we like it as simple as possible, and
the CC22 does the job.” The company
uses four of the machines at its facility
in Torrance, Calf., two in Mooresville,
N.C., and 12 in Tijuana, Mexico
To inquire about Finn-Power machines,
contact Lillbacka USA, 1629 Prime
Court, Ste. 400, Orlando, FL 32809, 847-
Although the CC22 has a small footprint, it has a high output. The manufacturer rates it at
nearly 30 crimps per minute.
© 2017 Airmo Inc.
Contact our sales team about
designing a solution speci;c to your
end forming process requirements.
Using the right tooling can raise your
production levels, avoid rework and scrap
parts that increase manufacturing costs.
Airmo SelectForm® end forming tools
and systems are built and tested to
improve your performance.
end forming systems
Tube OD Ranges
0.13 in. to 6.00 in.
( 3. 3 mm to 152.4 mm)
800-558-7808 • Follow us on • Made in the USA
Great for manufacturing … Trailers, Fencing/gates, Pole barns, Car ports,
Sporting equipment, Farm structures (feed rings, panels, saddle racks),
Boat frames-lifts, Industrial racking … to name just a few!
Bender (Model 2650)
From the leader in shop benders
• Steel I-beam construction rein-
forced with heavy steel framing
• Bends round, square,
• Handles schedule/thick wall
pipe with ease
• Extra-large oil tank makes contin-
uous multi–shift usage easy